Liebregts

Thank you

For some reason I did not see your comment when you posted it. So I am sorry that I respond only now. It is a very good remark that you made about the unleaded fuel. The Healey has been running on unleaded fuel for many years before we did this rebuild, so we did not really pay attention to it. But you are right that it is important. May I ask your advise: if we add an additive as lead replacement, should that be added every time that we fill up the fuel tank or only every now and then?Also I read about the valve seats that could still be saturated with lead, but I assume that this lead will no longer really be there because the machine shop machined the seats. Correct?I am also interested in what exactly happens with the cast iron. The temperature of the gasses with unleaded fuel is high…

For some reason I did not see your comment when you posted it. So I am sorry that I respond only now. It is a very good remark that you made about the unleaded fuel. The Healey has been running on unleaded fuel for many years before we did this rebuild, so we did not really pay attention to it. But you are right that it is important. May I ask your advise: if we add an additive as lead replacement, should that be added every time that we fill up the fuel tank or only every now and then?Also I read about the valve seats that could still be saturated with lead, but I assume that this lead will no longer really be there because the machine shop machined the seats. Correct?I am also interested in what exactly happens with the cast iron. The temperature of the gasses with unleaded fuel is higher. I heard people mentioning that the cast iron will sort of drop down, reducing the valve clearance, but I do not fully understand it. I will look for more information. Thank you very much for your comment.

I expect that the entire car will be ready within one or two months from now. It has been resprayed and all individual components have been restored. The interior still has to be installed. The photo shows how far it is now. I plan to make an Instructable about the restauration of the entire car after it is ready.

The weather was lovely indeed. Funny detail: when I wanted to take the photo with the workbench in the back of the car, there was too much sunshine so the workbench was in the shade and not really visible. There were some clouds so I decided to wait until a cloud would reduce the sun light a bit. But all clouds passed left or right of the sun. After half an hour I went inside and waited until the evening when the sun was not so bright anymore and then I took the photo.

Thanks

Thank you

When I made the Instructable I tried to find out the price at home depot, but their website is not accessible from The Netherlands. I am happy that you mention their price because it confirms what I thought. I had seen some YouTube videos where people make workbenches out of eight to ten 2x4s and they say their total costs are around 50 dollars.Indeed prices will increase even further. So let me know when you are selling 2x4s in The Netherlands :-)

Thank you. If you made this look on something I would love to see a photo of it.

Thanks for the idea.

Thank you

Thank you

Dank je wel

Thank you

Thank you

In step 7 you show the number 94 on a photo. Isn't the abacus showing the number 84?

I am happy that you like it, but I doubt if an art gallery would display this. Nice suggestion anyway.

Thank you. Please, send me a photo if you made one.

Thank you. I enjoyed this challenge a lot.

I used a thin tape, but I think the thicker type will work fine as well.

thank you

Nice video. I have never seen that rainforest before and it is great that the birds there are moving. Thanks for your comments.

you are welcome

thank you

Thanks

Thank you.

The horizontal slots have no purpose. I reused an old piece of plywood and the slots were already there.

Nice idea. Thank you.

Thank you. I have changed the title so now the word "coin" is mentioned in the title.The animals can indeed also be used to make a necklace.

I do not know the exact weight but I guess the engine is about 250 kg. Steel is very strong so I was not afraid it would collapse.

Nice suggestion about the handwheels. Thank you

I also do not have a Bentley or classic car.

I drilled holes through the engine stand to mount the engine supports. You can see that partly on the photos at step 15. For another engine I will have to drill additional holes or add something else. That depends on the next engine.

Thank you. I am going to try that.

Thank you very much.